b'Timber wall framing with wall insulation as all Additional building wrap with 75mm cover tospecified by Architect. head flashing.Selected profiled exterior metal sheet150 upstandcladding on 20mm H3.1 vertical timber battensBuilding wrap to return into louvre opening. to Architects specification.Provide flashing tape over wrap as per WANZ Purpose made head flashing with 15 slope towindow installation system. extend 150mm behind cladding. Provide 40mmmin cover to head of louvre with drip edge andHead trimmer or lintel as required to span stop ends.5opening. 20mm cover to joinery40 x 25 x 3 fixing angle pop rivited to back of Inseal tape between joinery and flashing.frame @ 300mm c/c. Fix to platewith wood screws @ 300mm c/c.Line of jamb flashingOsbournes Model WPL50 (Flanged).Model WPL 50 (Flanged Frame)Typical Vertical Corrugate/Louvre Head Detail 01 Osbournes LtdScale 1:5Timber wall framing with wall insulation as all Selected profiled exterior metal sheetspecified by Architect. cladding on 20mm H3.1 vertical timber battensPreformed jamb flashing. to Architects specification.Pop rivit flashing to fixing bracket.Compressible foam. 1 corrugation min cover35mm H3.1 treated packer to stop above silltrimmer to allow sill flashing to finish hardagainst trimmer stud. 18mm cover min40 x 25 x 3 fixing angle pop rivited to back of 3108 Inseal tape 12mm thick x 10mm wide.frame @ 300mm c/c. Fix to plate Building wrap to return into louvre opening.with wood screws @ 300mm c/c. Provide flashing tape over wrap as per WANZLine of sill flashing under. window installation system.Osbournes Model WPL50 (Flanged). Line of head & sill flashings.Model WPL 50 (Flanged Frame)Typical Vertical Corrugate/Louvre Jamb Detail 02 Osbournes LtdScale 1:5Page 6'